DynaVap 2021 M Dry Herb Vaporizer NZ.
DynaVap Products available - In Stock NZ.
The most unique Portable Vaporizer on the market, the new 2021 M. DynaVap VapCap Pens have been a huge hit world-wide. Flick - Click - Vape! "Don't knock it till you try it", we did and we can honestly say it's one of the very best vapes we have tried in 14 years! It's quick, easy and gets the job done fast! It's also great fun.. better suited to home use but totally portable. Thermal Extraction at it's finest! No batteries just a Torch Windproof Lighter is all you need and we have 2 different Torch Lighters available. See below.
New DynaVap 2021 M VapCap Pen, April 01, 2021 Release NZ.
Just the Pen - Package Includes.
- 1x DynaVap 2021 M Silver Pen.
Or buy a DynaVap 2021 M Starter Kit!
We also have DynaVap 2021 M Starter Kits that have everything you need, our kits are slightly different, we have swapped the lighter for our best Torch Lighter, The Blaze. Check out our DynaVap 2021 M Starter Kits here.
The New DynaVap VapCap 2021 M Pen is stunning!
Helenskinz 2021 M images.
The 2021 “M” is the 5th iteration of the signature medical grade stainless steel devices.
Click to enlarge.
Let us begin with the tip. Septa serrated fully faceted extraction chamber incorporates our 2 position adjust-a-bowl and an incremental fin profile.
The stem is enhanced with an intuitive tactile navigation geometry and is supplemented with next generation chiral airports. Opposite the airport you will find a pro"M"indent compound angled rocker. Finally, a 10mm tapered mouthpiece seals the deal for use with water-pieces.
Take me straight to the DynaVap 2021 M Pages. Click here.
The new 2021 M has not changed much from the 2020 M. The 2020 M is a great pen and the 2021 M can only be better! We stock both the 2020 M Vape Pens and the new 2021 M Pens in Auckland, NZ.
Getting to know your VapCap 2021 M.
- Stainless Steel
- Stainless Steel
- Total Length
- 92 mm
Discrete and Powerful! The VapCap is one of the best performing vapes we have ever seen and used. Thermal Extraction at it's finest. The 2021 M DynaVap VapCap Pen is a little masterpiece, if you don't want to mess about waiting for your electronic vape to heat up you will love the DynaVap VapCap 2021 M, it's ability to extract is outstanding! It gets the job done fast!
Super easy and very effective the 2021 M packs a punch once you "Get the Knack"! It's not hard and it's fun! This latest model allows no battery conduction vaping at it's finest. You only need your pen, some herb and a heat source, typically a 1-4 flame butane windproof torch lighter. Anything will work including your stove element but for best results you will want to heat the DynaVap 2021 M with a decent torch lighter like our Blaze or Flintstoner Torch Lighters. Heat, wait for the Clicks and Vape It! If you are confused already, that's fine, it does appear to be very similar to a pipe but the DynaVap Pen is a true conduction vaporizer and produces vapor when you heat the Cap. You must roll the pen over the flame for about 5-10 seconds until you hear the VapCap click, usually twice or 2 clicks at once, when you hear the click you can draw on the device using the Air Ports on top with your finger or thumb, rolling the pen and either exposing or covering the air ports to find that perfect flow and ideal resistance. Repeat until satisfied! We find the best method is to completely block the 2 airports, take a long slow draw until you hear the Cool Down Click and release the airports while still drawing for about a second. You should get excellent results if you try this method. Remember if it takes like smoke, you have combusted/over-heated your herb. It's a very fine line between vaporization and combustion. You need to heat it as much as possible without combusting, that's why the Cap is set to click, it's saying you have reached the fine line and to stop the heat! If anything, the DynaVap VapCap will teach you the difference between Vaporization and Combustion, there's no better way to understand it than using a VapCap. You will combust some loads, it's just part of the whole flame vaporizer deal but you will get better at it as time passes we promise.
The easiest way to heat your VapCap is to use a Single Torch Lighter, check out our Torch Lighters here. The best lighters are the Windproof Torch Lighters, preferably single flame as often multi flame lighters can be a bit much. We certainly found the single flame more controllable and less likely to combust the material.
Buy Aomai Single Torch Flame Lighters: Blaze & Flintstoner.
Click below to buy a torch lighter. We have tested over 15 different torch lighters from 1 flame to 4 flames and we whittled it down to the best 2 lighters, both are single flame because we found all the multi-flame torch lighters were way too hot, too much flame to heat different areas of the cap and they tear through the fuel, 4x the amount of fuel on a quad lighter. They also get extremely hot! The single flame torch lighters are fantastic to use on the VapCap Pens, you can heat the lower part of the cap to finish off the oven load and work your way up to the tip so you get your Captive Cap to click. We highly recommend the single flamer which is the opposite to what we thought we needed in the beginning. Food for thought! A reliable lighter is also super important, there's nothing worse than a lighter with a mind of it's own. These lighters are great and always ignite, they are easy to use, easy to fill and they don't get super hot when using for extended periods, we have spent weeks testing these lighters and we are very happy with Aomai as a brand, we have had no complaints to date.
You really want a lighter like the examples above rather than a hand held gun shaped blow torch, they are a bit too much and if you heat the VapCap too much or too quickly it will quite likely combust and you will be smoking! You want to heat the herb to "Vaporization Temperature", not burn it (combustion happens a second or so after the click so you have to be really careful not to overheat the cap and combust your herb). If you combust it's no big deal, it will taste very strong and you will know instantly that you have combusted so just clear the oven, reload and keep going! You will want to dismantle the pen and clean out the inside of the tip with a cotton bud and ISO when you get a chance as it may taint the flavor of your herb if it's dirty from combusting. It tends to leave behind a dark residue inside the tip, it's very quick to clean, make sure you use Bee's Wax on your rubber O-Rings and turn the 2 pieces of pen as you join them back together, otherwise you will tear an O-Ring and it will need replacing. We recommend buying the DynaVap "DynaKit Basic" which is a kit containing spare O-Rings, Bee's Wax, spare screens and more.
Remember vaporization happens just prior to combustion, so it's a very fine line between Vaporization and Combustion, the fact that the VapCap clicks at the correct temperature is a huge help, it even clicks again as it cools down. The thing you really want to concentrate on and get nailed is the heating, it's all about where you heat the cap and for how long. Once you have combusted a few loads you will soon learn that you can continue to heat the lower part of the cap "After the Click" for almost a second, it's that much of a fine line. The first vape on a fresh load often isn't that great but your second one will rip because the pen is fully heated and so is your herb.
PERFORMANCE MAXIMIZED, DESIGN OPTIMIZED
DynaVap vaporizers and aromatizers are built to maximize performance without compromising design. Every element is carefully crafted, machined, and assembled in-house to ensure the highest quality product arrives at your doorstep.
IT'S THE SMALL THINGS THAT COUNT
At DynaVap, they love precision. Their vaporizers are manufactured with some of the tightest tolerances in the industry. They believe that success is found in the small details, and often we measure those details in thousandths of an inch (or 0.01mm to be exact).
USING YOUR DYNAVAP 2021 M
Most Important! Before your first use, please read all of these instructions and then do at least two, preferably more than two, dry runs with nothing in the VapCap! This is very important to become familiar with the operation of the unit and prevent unintentional combustion residues.
The 2021 M VapCap is unlike any other vaporizer, so give it a few tries empty to get the feel of its unique temperature-indicating click. Heat the VapCap in a quiet area, listen and feel so you know what you are looking for. If you are using a torch lighter, this should not take more than 5 or 6 seconds. Heat the middle of the cap not the end and rotate while heating. If more than 6 seconds go by and you don’t hear the click, stop heating and let it cool down. Also remember to allow it to cool down BEFORE you reheat it. If you do not wait for the cool down clicks you will not be able to heat again and hear the click because it's already in the "clicked" state.
If you severely overheat your VapCap it can be permanently damaged. It is very important you hear the cool down click, or allow it to cool to the touch, before heating for the next cycle. Repeat this procedure several times to get the feel of how this little unit operates. We do sell spare Captive Caps if you do have a problem and burn one out.
When you are ready for the first use, let it cool down, then remove the cap from the VapCap.
Fill the VapCap chamber with your material of choice. This can be done easily by pushing the VapCap into a container (Stash Tin) of your material and twisting. Pre-grinding your material is NOT needed like when using a bat, hitter or regular electronic vaporizer. If you prefer to grind, go coarse. Finely ground material will get through the diffuser disc and into the unit. Putting a nug on the screen and then crumbled material on top of that to the top of the oven is a great way to load your oven. Using Decarbed Herb made with one of our Decarboxylators really helps, we Decarb all herb for vaping, it cures it and gives it a beautiful aroma, according to Ardent it makes more potent and it pulls the last bit of moisture out of your herb, it vapes so well! Buy Ardent products here.
Place the cap back on the VapCap. Heat up the metal cap of your VapCap while rotating it, with the flame or heat source applied to the last third of the metal cap. Try to only apply heat to the side of the cap and NOT the end. This is not like lighting a smoking device. Spinning your hot VapCap Pen can be fiddly and also very hot on your fingers, if you want to make spinning your DynaVap 2021 M much easier and with cool fingers we highly recommend our GyraFlow VapCap Spinning Device.
DynaStash, Wooden Block with Magnet and hollow for storage! (the 2020 M). We do not recommend using a multi-flame torch, combusting your herb will drive you nuts!
If you haven't bought yourself a DynaStash yet and you are constantly looking for somewhere to lay your smoking hot DynaVap just grab your Grinder Lid and flip it over, use the magnet to stand your pen up, it also cools your cap down quicker. If you want everything including a DynaStash you might be better suited to the DynaVap 2021 M Starter Kit/Pack. Our DynaVap 2021 M Starter Kits are not your standard DynaVap Starter Kits, we customize the starter kits by making our own with a much better Blaze Lighter.
Buy a DynaStash so you can store your pen inside it and use it for your DynaSessions! If your Captive Cap is nice and free (helps if clean) the magnet should pull the hot cap off. It's a handy little device to make things a bit easier when it comes to dealing with super hot metal. They also look pretty slick sitting on the coffee table with a smoking hot 2021 M standing to attention on the magnet! In all seriousness, the DynaStash is not essential but is a great addon if you want the full DynaVap experience. You can buy one separately here.
The GyraFlow Device - This simple little device allows you to spin your VapCap Pen like a pro, it's simple, no moving parts and will make spinning your pen during the heating phase very simple. You can enjoy spinning your pen at any speed while holding it rock steady but the real bonus is the location of your spinning fingers! You can spin the pen from the cold end, hold the GyraFlow with your 2 smallest fingers and spin it with your index finger and thumb but right down at the mouthpiece end where things are much cooler. Most DynaVap users will have experienced burnt or very hot fingers while heating the pen, the GyraFlow fixes that instantly.
Check out the 2 minute video on how it works. It's not Rocket Science, it's just a simple hack but a very useful one that does a mint job.
GyraFlow with the 2020 M Vape.
In Stock Auckland, NZ - GYRAFLOW NZ.
DYNAVAP 2021 M VIDEOS
Please visit the DynaVap YouTube Channel where you can watch all their videos. You can go straight to their Channel, here! YouTube have restricted them so they can no longer be embedded into pages on websites, you must go to their YT Channel, here. Check out the new 2021 M Videos.
Check out the DynaVap USA Website - VIDEO SECTION
A wide selection of helpful videos to watch.
Check out the DynaVap YouTube Channel - DYNAVAP VIDEOS
A great resource, loads of useful DynaVap Videos.
Click image below to enlarge.
Helenskinz is an Authorized Reseller of DynaVap products in New Zealand and Australia. Warranty approved. Helenskinz imports all DynaVap products directly from DynaVap USA.