FMJ EMBLAZER - Full Metal Jacket for Dynavap Cap NZ

Save 14%

Color: Golden FMJ
Price:
Sale price$42.00 NZD Regular price$49.00 NZD

Tax included Shipping calculated at checkout

Description

Ships from NZ
Location:
Ships from Auckland Warehouse.
Tracking Provided:
Aramex Courier.
Shipping Price:
Local Rates, $10 or $15 NZD Incl. GST.
Product Prices/Tax:
All displayed prices include GST.

FMJ EMBLAZER - Full Metal Jacket for Dynavap Cap NZ

FMJ EMBLAZER Full Metal Jacket for Dynavap Caps.

2024 Golden Version of the Vaping Fans FMJ.

This new Full Metal Jacket works great with a Torch or a Yllvape V2.0 Heater. It's currently the cheapest way to get vaping with a Heavy Cap. It is much cheaper than the DynaVap Armored Cap but does pretty much the same job.

It's all about HEAT RETENTION!

Install the FMJ in a split second, heat with a Torch or a Yllvape V2.0 Heater.

FMJ Armored Cap NZ  Blue THE B VAPE with FMJ Emblazer NZTHE B VAPE with Red Copper FMJ Emblazer NZ  Heating the THE B VAPE with FMJ Emblazer in YLLVAPE Heater V2.0 NZ
   

Golden FMJ EMBLAZER for Dynavap.

Full Metal Jacket of Gold Plated Red Copper , one of the best conductors of heat, designed to extract a full oven load in 1 heat cycle. If you are like most DynaVappers you will get more than one heat up on a full oven load if you are using a Tip with a decent sized chamber, like the 2023 M+ Finless Tip. The FMJ EMBLAZER slides over your existing DynaVap Cap. It fits all standard sized caps like the Captive & Low Temp caps. Simply slide the FMJ over your cap and you are ready to vape! You can experiment with your Torch Heating by heating the Cap and/or the FMJ. With the Yllvape Heater you may want to buy the smaller 8.5mm insert for the heater allowing you to place the Cap deeper into the oven, just like we suggest for the Armored Cap.

FMJ EMBLAZER NZ

The FMJ is made from 99.99% Red Copper and is Gold Plated, the FMJ can transform your DynaVap Cap into a powerful one-hitter, it takes longer to heat with a Torch or a a Yllvape V2.0 Induction Heater but it's well worth the wait! Typically you will get very similar results to the DynaVap Armored Cap. The main purpose of the FMJ is to get 2 or more full draws from your DynaVap Pen from one heat up. It will retain the heat for much longer than a regular cap. If you are also using a Stainless Steel Tip it will last even longer as that will also retain heat for much longer than a Titanium Tip. 

The B Vape with FMJ Emblazer NZ

Why Red Copper?

The use of red copper on the cap eliminates the need to roll your tip to get an even heat up. The FMJ Copper acts as a thermal reservoir that holds heat and evenly distributes it, allowing the user to choose whether they want a mellow heat up or a mind blowing on the edge of combustion triple hitter. It's very easy to experiment with the temperature using a torch or an Induction Heater. The copper FMJ acts as a better buffer for combustion which is always a bonus, allowing you to be less concerned about combusting. 

For more info on FMJ Caps check out our DynaVap Armored Cap page. It's a very similar product, both do an excellent job at increasing the extraction time considerably, you can expect to get up to a minute of vaping from one heat up. The FMJ Emblazer is simple to use once you get the hang of heating it, your cap will click as normal, just obey the "Click" and remember it will take longer to heat especially on the first heat up. Once it's hot it takes less time to click the cap with the FMJ and after a while it just becomes normal but with much more time to vape away on your Pen or Bong than a regular Cap.

Features.

  • Higher mass for longer and further extraction
  • Fits all standard DynaVap Caps
  • Adjustable fit

Package includes.

  • 1x FMJ [Copper Sleeve for your Cap] - (Does not include DynaVap Cap).
Holding the FMJ Emblazer NZ

Compatible with.

  • All standard sized DynaVap Caps
  • Torch Lighters
  • The Wand by Ispire
  • The YLL V2.0 Induction Heater

Not Compatible with.

  • The Orion V2 by DynaTec (Oven too small)

Induction Heaters.

Check out our Yllvape V2.0 Induction Heaters and The Wand, both do a great job of heating the FMJ and the Armored Cap

Induction Heating with the FMJ?

Induction Heater compatibility with the new FMJ varies due to the increased diameter of the new cap (12mm). When used with an induction heater like our Yllvape V2.0 Heater it may require multiple heat cycles (usually 1 and a bit) to achieve the same results as a torch lighter. It's simple to heat and within a minute you will have a DynaVap Pen that isn't rapidly cooling as you vape it, it cools in slow motion! The FMJ retains heat for an extended period of time not unlike a stainless steel tip does compared to a titanium one. It really is a pleasure to use with the heater, just like the DynaVap Armored Cap! The Cap may be slightly tighter so be careful if using it on certain pens that may get scratched.

Induction Heater Options for DynaVap NZ

Precise temperature control for the perfect hit every time! Compatible with DynaVap VapCap Pens. Heat your DynaVap Tip with the safest and most precise temperature control ever. We have come a long way from rubbing 2 sticks together, The Wand induction heater is a fully portable device powered by 2 removable 18650 batteries so you can even pack spares when on extended missions. You can also use an external fast charger to charge your batteries if you prefer, the beauty of removable batteries! DYADP Adapter Insert available for DynaVap, convert your Wand for DynaVap! NOW available for DynaVap, convert your Wand for DynaVap! Tripods also in stock NZ.

Yllvape Induction Heater V2.0 NZ

YLLVAPE YLL-IH V2.0 "2nd Gen" for DynaVap, a torch-less heating solution that offers superior performance, portability, adjustable wattage control, and user-friendly operation. Elevate your DynaVap experience with this compact and innovative device. You can now head for the hills with this device and vape all day long, you may need spare batteries which is an option with this model, just open the back and swap out the 2x 18650 batteries inside. Batts not included. All new, released Oct 2023. In stock NZ.

Yllvape Decapper & Stand for All DynaVap Caps NZ

DynaVap Armored Cap in Yll Decapper Toool NZ

See All DYNAVAP Products

See all DynaVap products - Helenskinz NZ   

DynaVap M7 Vaporizer Pen NZ    DynaVap M7 XL Vaporizer Pen NZ

DynaVap The VonG & VonG (i) Vaporizers NZ    DynaVap The VonG Starter Kits NZ

DynaVap The B Vaporizer Neon Colors NZ    DynaVap 2023 M Plus Vaporizer NZ

DynaVap Stainless & Titanium Tips - Build a DynaVap Pen Helenskinz NZDynaVap Cap options - 4 different Caps


DynaVap Downloads NZ

DynaVap USA Website

Check out the DynaVap USA Website - VIDEO SECTION

A wide selection of helpful videos to watch.

Check out the DynaVap YouTube Channel - DYNAVAP VIDEOS

A great resource, loads of useful DynaVap Videos.

Helenskinz is an Authorized Reseller of DynaVap products NZ


Helenskinz is an Authorized Reseller
of DynaVap products in New Zealand and Australia. Warranty approved. Helenskinz imports all DynaVap products directly from DynaVap USA.

Click to visit DynaVap USA - Authorized Retailers page.

 Dynavap USA 

Portable Vaporizer Accessories. Vape Supplies NZ.

Imported American Herb Grinders
Need a Grinder?Vaporizer CasesRYOT Vaporizer Cases - SmellSafeNon-Stick Herb Grinders NZNon-Stick Herb Grinders NZ - Cali OG Slick & SLX

You may also be keen on..

Recently checked out..