VapeTube 14 Water Bubbler Tool 14mm for Mighty, Pax, IQ2 NZ

Location: Ships from Auckland Warehouse.
Tracking Provided: NZ Courier.
Shipping Price: Local Rates, $10 or $15 NZD Incl. GST.
Product Prices/Tax: All displayed prices include GST.

VapeTube 14 Water Bubbler Tool 14mm - Female Joint.

Portable & perfect for our Water Pipe Adapters. Using our Watertool Adapters you can connect your Mighty, Mighty+, Mighty+ Medic, Crafty, Crafty+ and so many more vapes (if you have an adapter) to the VapeTube 14 Water Bubbler Tool 14mm. If you owned this VapeTube 14 Water Bubbler Tool (14mm) you could use it with DynaVap Pens connected using an adapter or even a BB6 or BB9 DynaVap Stem. This would allow you to use all of your vapes with the VapeTube 14 Water Bubbler. Or, if you only want to use your Bubbler with a DynaVap Pen you can buy the VapeTube 10 which is the same but a fraction smaller with a 10mm female joint. So you would not need any adapter at all. The very best way to do it is to use a 14mm Bubbler with a BB9 DynaVap Stem or a VonG Pen, then you will have a 14mm Bubbler for any vapes you have now or in the future.

This 14mm Bubbler is the best option for all Mighty+ Medics.

• Please read the page to see all the options for adapters and different ways of adding a bubbler.

BB9 Stem with the 10mm & 14mm Bubbler.

This Bubbler is a classic that started as the AromaTube, this classic design has been around for years. Nice and solid! This is why we say it's portable, it's not a fragile delicate water tool, you can carry it in a bag or jacket pocket easily. As far as Bubblers go this has always been a favorite in our store, they aren't bullet proof but they are certainly more rugged than most Bubblers in the market. They are ideal to hold in your hand, it's only 130mm in length so easy to use discreetly.

VapeTube 14 Main Features.

• 14mm Female Joint works with Pax, Mighty+ Medic etc, all you need is an adapter!
• Our Water Pipe Adapters are 14mm + 18mm. We stock adapters for the Mighty+ Medic here. (There's about 4 different options).
• Easy Filling, with 14mm joint facing down place under tap to fill with H2O. The best method is to fill a glass of water and suck the water up into it to fill it.
• The Bubbler will automatically drain to the perfect level before you attach it to your vape. If unsure or you are having trouble getting the water to behave you may want to watch some videos on YouTube, just Filling Vape Water Bubblers in general is all you need to look for.
• The cool water conditions the vapor allowing bigger and cooler hits with little throat aggravation.
  
• Compact H2O Filtration. Small but effective, even though it's a smaller bubbler it still does a great job of cooling your hits.
  
• Made with Borosilicate Glass. Crystal clear glass is better in Bubblers so you can see the Vapor as you draw, this helps you see how well your vape is extracting.
  
• Easy to Clean - Hot Water, ISO Alcohol, Rock Salt, Randy's Black Label Cleaner. You can even soak it in a Ziplock Bag overnight and give it a good shake before you rinse it with hot water, we have found Randy's to be the best cleaner ever! We don't recommend soap, you don't want to risk getting anything stuck inside the bubbler, stick with ISO & Salt, or Randy's Black Label Glass Cleaner.

Cleaning your VapeTube 14 Bubbler.

You will find warm water and shaking it about inside works well for cleaning, you can start buy soaking it with some our imported Randy's Black Label Glass Bong Cleaner and we also suggest using some ISO Alcohol for the resin build up if any. We also have ISO Alcohol VIPES which are ISO Soaked Wipes, a nice pack made especially for cleaning vapes and vaping equipment. Check out Sneaky Pete's Bubbler Video below, his Bandit is the same as our VapeTubes.

What's In the Box:

• 1 x VapeTube 14 Glass Water Bubbler Tool 14mm.
  

*Adapter not included. See bottom of page for options.

Buy Glass Bong/Bubbler Cleaner

Other Water Tools

  

* Stand for this 14mm Bubbler on this page, Only.
Will not work with the 10mm Bubbler.

Mighty+ Medic Connected to a VapeTube 14 Bubbler using the Glass Adapter and a Glass WPA NZ.

VAPORIZER SAFETY WARNING

When using Bubblers on Vapes!

Please be extremely careful with any Water Bubbler that obviously contains water when it's a typical bubbler set up with the bubbler sitting above the vape. Bubblers can suddenly dump all of their water if you tip it too far to the side or fumble about when removing it from the vape. It effectively spills out the down-pipe straight into your oven. It likely won't happen but any bubbler can do this and we have seen it a few times over the years. Interestingly enough we accidentally had a bubbler dump it's water in our Yllvape Angus Enhanced vape. All it did was soak the herb (had to throw away) and the water poured out the air port on the bottom. Apart from some steam at first the vape is 100% fine after a Burn-Off session. Just be careful and keep your bubbler upright as possible and don't overfill it, we are unsure if other vapes will be as forgiving as the Angus Enhanced. Once the dumping starts you can't stop it, it starts to siphon the water out leaving your bubbler empty. Note the "Review" below from Russel H. He mentions a friend coughed when using his Bubbler and that induced Siphoning, (dumping of all the water) releasing all water from the Bubbler into the vape destroying it. Not sure what vape but a good warning to everyone. A safer way to use a Bubbler is to use a Whip and Bubbler set up. Siphoning can still occur but you will probably have enough time to lower your bubbler below the vape (stops siphoning immediately, like siphoning Gas from a car) or you can quickly pull the whip off the vape.

See below, there's 2x XVape options we stock, both Whips, one is a Whip Adapter that goes from your M+M Swivel Mouthpiece to the bottom of your Bubbler (good one to use) or we have the XVape Whip & Bubbler that has a Semi-Mini Bubbler on one end and the other end slides onto your Swivel Mouthpiece. These are both safer and very effective.

Helenskinz will not be held responsible for any damage to vaporizers if this happens with any of our bubblers. It's rare but it can happen so please be careful how you use it and be sure to read the manual. Get to know your bubbler over the sink before putting on your vape. Fill a cup of water and suck the water into the bubbler like a straw. Fill your Bubbler in the sink and put your adapter in the bottom, now try to remove it quickly, sometimes this will induce siphoning, do everything slowly, like removing the adapter, you don't want to cause any pressure or vacuum. Above all, have fun but be careful!