POTV Gordito Mini Glass Bubbler NZ

POTV Gordito Mini Glass Bubbler.

This is a handy size as it fits many vapes, a Mini Water Bubbler for a variety of vaporizers! The perfect Mini Bubbler for the Mighty+ Glass Adapter on the Mighty+ Medic.

This product is compatible with several vapes and adapters: POTV Lobo, POTV ONE, XMAX V3 Pro, Pax+ Glass Adapter, Crafty+ Glass Adapter, Mighty+ Glass Adapter, Volcano Glass Adapter, Healthy Rips Rogue & Fury Edge.

To use with your Mighty+ Medic Vaporizer or your Pax you will need to purchase a Glass Adapter. We have them for Pax and Mighty+, they allow you to use Glass Stems, Bent Glass Stems, Mini Bubblers, Water Pipe Adapters and more.. a very cool mod. You can set up some nice cool stems, we have them as long as 90mm, you can fill with our Ruby Terp Pearls held in place with our Stem Plugs for Ultra Cooling!

The ultimate on-the-go bubbler!

Get closer to at-home bubbler sessions with the POTV Gordito Mini Glass Bubbler! This beefy bubbler has more percolator holes and a larger water tank for bigger, cooler hits! POTV designed this bubbler to maximize big hitters like the Mighty+ series dry herb vaporizers so you can take those lung-busting hits anywhere, anytime!

Cooler vapor with greater airflow.

Bigger is better with the Gordito. With more percolator holes and more room for water, this strapping little glass bubbler was built to handle those seeking longer, fuller draws from their Mighty+ Medic, or any other compatible vaporizer or Glass Adapter. 

Many mini bubblers bubble away and really do little to cool your vapor, the Gordito Bubbler is wide and tall enough for it to work more like a normal bubbler, it isn't so constricted like many mini's, that's why we love this one more than other options available.

Still portable and spill-resistant.

Take your bubbly sessions anywhere with the Gorditos portable design. As the perfect travel companion, the Gordito is small enough to take on any excursion and quickly connects to your vape when ready.

A variety of 5 colors to choose from.

• Clear
  
• Blue
  
• Red
  
• Green
  
• Purple

Compatibility.

The Gordito is compatible with the following:

• POTV Lobo
  
• POTV ONE
  
• POTV XMAX V3 Pro
  
• XMAX V3 Pro
  
• PAX+ Glass Adapter
  
• Mighty+ Glass Adapter
  
• Crafty+ Glass Adapter
  
• Volcano Glass Adapter
  
• YLL Angus Enhanced
  
• Healthy Rips Rogue
  
• Healthy Rips Fury Edge
  
• And more..

Dimensions.

• Height: 2 and 1/2 inches (64mm)
  
• Diameter: 1 and 1/4 inches (32mm)

Package contains.

• 1x POTV Gordito Mini Glass Bubbler.
  

IMPORTANT: PLEASE LEARN HOW TO FILL SO IT WON'T SIPHON OUT.
This applies to all Bubblers not just the Gordito.

Important Tips.

To get water into the tank you can suck it up from a cup of water but do not let it fill to the top, stop at about half way and then you can lightly blow or suck on the bubbler to get the water just right, about 1/3 full. So do not over fill. Now check that there is almost no water in the very top section, if you overfilled it there will be. If you leave that water there it will eventually decide to drain out and when it does it will likely start a vacuum which can in turn start siphoning of all the water in the bubbler, you must make sure the top is not holding any water. Draw on the bubbler before you use it on your vape, do it a few times!

BUBBLER/VAPORIZER SAFETY WARNING.

Please be extremely careful with any Water Bubbler that obviously contains water when it's a typical bubbler set up with the bubbler sitting above the vape.

The key is filling it correctly in the first place, please watch the 2 videos above. These videos are made by the manufacturers of this Mini Bubbler. Fill it properly, draw on it before you put on your vape and when you can remove it by twisting off the Glass Adapter on the Mighty+ instead of pulling the bubbler out while on the vape, do it, you don't want to risk getting water in your vape. We have had water go through a few different vapes and it just pours out of the airway but we have not seen what happens on all vapes. Use at your own risk, it's not that hard, it's just a heads up.

 Bubblers can suddenly dump most of their water if you leave water in the top section, when it isn't filled correctly or if you fumble about when removing it from the vape. It effectively spills out the down-pipe straight into your oven. It likely won't happen but any bubbler can do this and we have seen it a few times over the years. Overfilling it by a bit can induce siphoning of the water from the tank.

Helenskinz will not be held responsible for any damage to vaporizers if this happens with any of our bubblers. It's rare but it can happen so please be careful how you use it and be sure to read all info and watch the videos. Get to know your bubbler over the sink before putting on your vape. Fill a cup of water and suck the water into the bubbler like a straw. Above all, have fun, don't let this put you off, they are great, you just have to think about what you are doing, follow any tips and you will really enjoy it.

Portable Vaporizer Accessories. Vape Supplies NZ.

Buy Mighty+ Glass Adapter

 Imported American Herb Grinders.

The Mighty+ Medic Hybrid Vape works best with a Coarse Grind. You can achieve this using a 4 piece Herb Grinder.

Titanium & Golden Herb Scoops available, we import Titanium and Gold colored measuring scoops. They are ideal for measuring the amount of herb you are using when medicating with Medical Cannabis. Grind and measure, then pour straight into your oven from your Stash Tin of ground herb.

Non-Stick Herb Grinders NZ.