Description
Location: Ships from Auckland Warehouse.
Tracking Provided: Aramex Courier.
Shipping Price: Local Rates, $10 or $15 NZD Incl. GST.
Product Prices/Tax: All displayed prices include GST.
Yllvape IH V2.0 - Temperature Control Induction Heater for DynaVap NZ.
New Release (Oct 2023).
YLLVAPE YLL-IH V2.0 "2nd Gen" for DynaVap, a torch-less heating solution that offers superior performance, portability, adjustable wattage control, and user-friendly operation. Elevate your DynaVap experience with this compact and innovative device.
YLLVAPE YLL-IH Induction Heater (IH) for DynaVap, the ultimate solution for heating your DynaVap without the need for a torch. This compact and portable device offers a host of features designed to enhance your vaping experience. Version 2.0 offers the same interface and controls as the original YLL IH V1.0 but it's a completely new device that now has a battery bay on the underside with a lid held on with magnets. The device comes without batteries and requires 2x 18650's that you can quickly remove and swap out for fresh ones if you have at least 4 batteries in total. Or you may want to remove them to charge your batteries in a special external charger you may have. The kit comes with a Type-C USB Charging Lead that allows you to charge your 18650 batteries while installed in the device if you prefer.
What Batteries to use?
We recommend using 18650 batteries like a 2500mAh or higher with a high amp rating. If you have batteries that can output 20-30 amps continuously the YLL V2.0 heater will operate as it should. If you use 10amp batteries for example your heater will show the "MAX" signal on the display and drop to low power as the batts max out. If using high amp batts the heater will work continuously at the highest setting (60w) without a problem, that's when the device really shines, constant back to back heat ups won't be a problem with proper batteries. We have experimented with many different batteries but finally settled on the batteries that Yllvape use themselves. We managed to purchase the exact same batteries that Yllvape use in this heater. The batteries below are what Yllvape recommend using. 30amp batts are ideal!
Charge in an external charger or in the device using the USB-C Lead provided.
Buy EVE 18650 / 30A / 2500mAh Batts.
Open the Back Panel, you will find the Insert Tool, the Insert and the Battery compartments behind the panel that is held on with magnets.
The Heating Coil elevation is also adjustable, you can adjust this inside the battery bay. You can now fine tune your heater to work just the way you want. Raising and lowering the heating coil will change how the pen is heated and when your cap clicks, you just need to find the sweet spot but most people won't adjust this as it is well tuned on arrival. (More on this below). The small screwdriver tool sits on a magnetic section within the battery compartment as seen above, "top left of the device". We now have Ceramic Inserts (2 sizes) for regular Caps and the Armored Cap.
When it comes to using the heater you can set it up very easily as it now only has one regular mode and a Boost Mode. Normal Mode is Power (watts) and can be set quickly to the power you want to use, like 35w or 50w and so on. All pens and all caps fit the oven on the YLL IH V2.0 including the DynaVap Armored Cap. We have tested the heater with the DynaVap Bonger, The B Vaporizer, the 2023 M+ and the Titanium VonG.
The higher the power the quicker your cap clicks. Remember to still Obey The Click! When your Cap Clicks it's time to remove the pen from the heater. A pre-heat is always a good idea, so heat to the click and then cool to the click. Repeat but this time vape it! Once you notice "when the cap is clicking" at the power you have set (with a hot pen) you can then double click the middle button and set the time you want the power to run for when your pen is in the oven. For example, 12 seconds, if it clicks at about 12 or 13 you can set so it won't exceed the set time and combust if you miss the click! All the instructions for this device are printed on the back of the box.
Variable power/wattage.
Enjoy the freedom to adjust the wattage (30W to 60W) for optimal vapor production. Whether you prefer big clouds and fast extractions or a slower, more gradual heat-up, the YLL-IH 2.0 has you covered. There is no other induction heater in the market that we have seen that is so adjustable. The choice is yours, leave it alone or go nuts! The sky is the limit!
Adjustable Heating Profile.
Fine-tune your vaping session using the tool conveniently located near the battery chamber. Simply adjust the base of the coil to achieve your desired heating profile. YLL induction heater is a device that uses electromagnetic induction to heat up a DynaVap vaporizer. When the DynaVap is placed into the induction heater, it triggers a sensor that activates a magnetic field automatically. This magnetic field then induces an electrical current in a metal coil inside the heater, which generates heat. Screw the heating base UP or DOWN to adjust the Dynavap heating profile using the tool provided in battery compartment. Note: You can leave this alone, you don't have to touch it at all if you'd rather not. The device comes with the 11.5mm Ceramic Insert.
Boost Mode.
Experience the full power of the YLL-IH as it runs at maximum wattage supported by the batteries. This ensures rapid heating, quick clicks, and torch-like performance.
Timer.
To adjust the timer, double click the power button and choose a setting from 16 seconds to 60 seconds. Confirm your selection by double clicking the power button again.
Two Replaceable 18650 Batteries.
Batteries Not Included. If a device has "Removable Batts" as an option they must be removed prior to shipping from the factory, like Vaporizers and other electrical devices. Another example is The Wand, that also has to ship battery-less! This is the only reason they don't come with batteries. We recommend using decent vaporizer batteries like our EVE 25P 18650 2500mAh 30A Batteries . You should use at least 2500mAh and 20A or higher. If you use batteries that are not up to spec you will see your YLL V2.0 Heater display MAX, MAX, MAX as you heat. This means your batteries are tapped out and the heater has gone into low power mode. Check out our new batteries, we have ideal 18650 batteries for the YLL V2.0 heater. Recommended by Yllvape for this heater. These batteries will allow your Yllvape Heater to run at full power! 60w and Boost Mode.
Suitable Battery Options for the YLL V2.0 Heater.
EVE INR18650-25P 2500mAh - 30A
What's included.
- YLL-IH V2.0 Induction Heater (2023 model)
- USB Type-C charging Cable
- (Batteries are not included) See here.
Works with all of your DynaVap Pens, Tips & Caps!
DYNAVAP 2023 M+ | THE BONGER | THE B VAPE | OMNI | ARMORED CAPS
THE 2024 M7 & M7 XL | VONG | WOODWYND | STANDARD & FINLESS TIPS
Please note: The YLL V2.0 Induction Heater is one of the only portable induction heaters in the world that can heat a DynaVap Armored Cap. Heaters like the Orion V2 cannot as the oven is not big enough to fit an Armored Cap. The YLL V2.0 does fit and we also have new ceramic inserts for standard or Armored Caps available. This insert goes inside under the coil, a very simple mod to install. The Wand can heat the Armored Cap too but we believe the Yll V2.0 heater works better having tried both. The Yll heater detects Titanium much better than the Wand does if you have a Titanium Tip which many of us do these days.
IMPORTED
Why would you want a heater when you can use a lighter?
It's a good question. We thought induction heaters for DynaVap defeated the purpose of using a cheap DynaVap Pen and if you are going to buy a heater you may as well buy a vape. Well it does make sense, we thought just like that for the longest time and then one day we were given a sample of a new heater and after a few heat ups we were hooked, it was so easy to use with consistent results!
The thing many people don't realize is that a decent induction heater and a DynaVap Pen can out perform most electronic vapes. You end up with the DynaVap Pen you love to vape and a super easy and quick way to heat it. Once you dial in exactly how long to leave the pen in the heater (microseconds) you will have the perfect roast every time. We love using the DynaVap Low Temp Caps as they buy you a bit of time when heating your vape, you can hold it in the heater for a split second longer (after the click), they really help you avoid combustion. Talking about DynaVap Caps, we have tested the DynaVap Armored Cap in the new Yllvape V2.0 Heater and it's all good news!
Yllvape V2.0 Heater with the DynaVap Armored Cap?
Induction Heater compatibility with the new Armored Cap varies due to the increased diameter of the new cap (12mm). When used with an induction heater it may require multiple heat cycles to achieve the same results as a torch lighter. The Armored Cap retains heat for an extended period of time not unlike a stainless steel tip does compared to a titanium one. The Cap is tighter as mentioned so be careful if using it on certain pens that may get scratched. The Armored Cap may scratch certain titanium and PVD colored tips and caution should be used in the placement and removal of the Armored Cap from your device. Scratches are normal and do not affect the performance of our tips or present a health risk.
We have tested the Armored Cap extensively with the new Yllvape V2.0 Induction Heater and it works very well. So well it's still being tested after a week. It's one of those things that caught us by surprise, we didn't expect it to work so well. We found that heating the Armored Cap at 45w works great, sit it in the oven and let it run until it times out, then let it heat again until you hear the click. Just the same as a normal cap but it takes longer to heat and once it's clicked it will allow you to have at least 2 large and long draws sometimes 3. It works very well in combination with the Haze DUO Bong, for some reason we found it was way better to use compared to a regular cap because it didn't try to combust every few seconds while using the Bong. It's very easy to combust using a Bong with DynaVap, it's probably because we are drawing a bit to hard. With the Haze DUO Bong you can draw and feather the 2nd joint with the glass stopper, keep lifting it to allow air to be drawn in, it stops combustion in it's tracks if you watch the vapor density in the bowl very carefully, if it gets too thick lift the stopper and empty the bowl but keep drawing. If you are wondering whether the Armored Cap works well with the new YLL V2.0 Heater it does and it feels like a whole new vape. It's easy to heat to the click using this heater and obviously all DynaVap Caps fit in the oven. See below, the new 2024 DynaVap M7 Pen with an Armored Cap in a Yllvape V2.0 Heater.
With the YLL IH V2.0 you can tune the heating coil manually and change the power which is a first for induction heaters. These things make this new device pretty special in our opinion. The removable batteries are a massive bonus too, what more could you want, a solar panel maybe?
This induction heater fits very well in our Shock Proof Vape Cases here if you are looking for suitable storage for your YLL IH V2.0 device.
Check here for the Latest Videos on the YLL IH V2.0 Heater.
Warranty.
Your Warranty is valid in NZ for 6 months. (Please read conditions below).
Authorized Retailers.
Important: For your YLL IH V2.0 Warranty to be valid in NZ you must buy it from an Authorized Retailer in NZ. You can check the Yllvape website, at the bottom of their page they display who is authorized to sell their products. Please check if unsure.
Authorized Retailers of YLLVAPE Products - Check here.
Support.
If you have any questions feel free to Email Us or try us on our Live Chat, always happy to help! We have been selling Yllvape Induction Heaters since the beginning and know the YLL IH V1.0 very well. We have been really enjoying the new YLL IH V2.0 Heater NZ, it's a fantastic device that will provide many hours of easy and very productive vaping. Now you can venture out and not worry about your heater running out of batteries, take a spare set with you and swap them out when your device is flat! Too easy.
We hope you really enjoy your new Induction Heater should you decide to go ahead and purchase one. If you haven't used an induction heater to heat your DynaVap Pens before you are in for a giant treat! Hang onto your torch lighters but don't be surprised if you never use them again.
______________________________________
What are your Heater options?
We do have alternatives and we recommend taking a quick look at what your options are for Induction Heating Devices. We stock the best Induction Heaters available from around the world!
Not many to select from, few options available out there!
THE WAND by Ispire, Portable Induction Heater for DynaVap.
Precise temperature control for the perfect hit every time! Compatible with DynaVap VapCap Pens. Heat your DynaVap Tip with the safest and most precise temperature control ever. We have come a long way from rubbing 2 sticks together, The Wand induction heater is a fully portable device powered by 2 removable 18650 batteries so you can even pack spares when on extended missions. You can also use an external fast charger to charge your batteries if you prefer, the beauty of removable batteries! DYADP Adapter Insert available for DynaVap, convert your Wand for DynaVap! NOW available for DynaVap, convert your Wand for DynaVap! Tripods also in stock NZ.
VapCap Vaping Instructions.
See All DYNAVAP Products.
Helenskinz is an Authorized Reseller of DynaVap products in New Zealand and Australia. Warranty approved. Helenskinz imports all DynaVap products directly from DynaVap USA.
Click to visit DynaVap USA - Authorized Retailers page.
