UFO Portable Induction Heater for VapCap Vape
UFO Portable Induction Heater Sale NZ: $199 NZD In GST.
10th AUGUST First Shipment ETA in NZ (Aprox).
PRE-ORDER SPECIAL PRICE 12% OFF - LIMITED TIME DEAL.
WILL SHIP SAME DAY STOCK ARRIVES. BUY NOW SHIP LATER!
Tracking provided - ARAMEX Shipping direct to your door.
Shipping Price: Standard Local Shipping Rates, $10 or $15 NZD.
UFO Portable Induction Heater for DynaVap VapCap.
By Vaping Fans - Herbal Vaporizer Mod Manufacturers.
Meet the New UFO Portable Induction Heater!
For Vaping your DynaVap VapCap "On The Go" with style, grab your UFO and enjoy Induction Heating while out and about, anywhere you please. Your VapCaps best friend when you're mobile. This is a brand new Portable Induction Heater for heating your DynaVap VapCap Pen, it's just releasing now in July 2021. We have been testing a bunch of Induction Heaters, portable ones because being Portable is what we are all about! Induction Heaters have been around for a while but there aren't too many portable induction heaters. This ones really nice and we have really enjoyed testing it. Check out the videos below. We will have stock in our Auckland warehouse in August 2021 and will be opening up Pre-Orders with a 12% discount for a limited time. It's great value when you consider the price of other portable induction heaters. We also sell the Orion V2 by DynaTec. See link at bottom of page.We have been testing the UFO's for a few weeks now and we have used them over and over again and have not had one glitch, we are getting a really decent amount of cycles per charge and the fast charging is excellent using the provided wall charger and our Plug Adapter. It's super easy to pop the UFO into your jacket pocket, step outside if that's what you do at home and slip your pen into the heating chamber and wait for that magic Click, or 2! The UFO is fantastic to use, we really can't justify how happy we are with the product right down to the kit itself and packaging, it's a really great product. It's not hard to set up for how you want it to work, we have all the info you need below. Put it this way, if we weren't completely satisfied with the UFO Induction Heater we wouldn't have placed an order for a bunch of them, we only want to sell awesome products that do what they are meant to do and are high quality. The UFO did nothing but impress us, it's a really cool little unit that works so well. We have been testing 3 different portable Induction Heaters and the UFO is as good if not better than anything else we tried. Because the UFO is nice and small it tends be the one you reach for every time.
UFO Induction Heater.
- Fast Heating 3-8s to Click.
- Very portable, can fit in a large pocket.
- Custom Heating - 2 Extra Glass Tubes included, all diff allows tuning of device.
- Heating Protection 12s.
- 5mins Auto Power Off.
- Auto Intelligent Activation.
- 2x Strong Magnets for VapCap.
- 6 Months Warranty - Valid in NZ & Australia.
- 1x UFO Portable Induction Heater.
- 1x Type-C USB Charging Cable.
- 2x Spare Glass Tubes.
- 6x Silicon Tuning Discs.
- 1x Fast Charger +(Free NZ Plug adapter from Helenskinz)
- User Manual.
After trying a few different Induction Heaters we can now appreciate certain things that were previously overlooked. Like the magnets on the UFO, they are better than any other heater we tried for 2 reasons. They are bigger and there's 2 of them so when you cool your cap by placing it on a magnet after a draw you can cool it on one and then as that magnet gets hot you can move it to the 2nd magnet which will bring about a 2nd click of your cap very quickly. The magnets are also much stronger so you can carry the UFO about with a pen or 2 on the magnets and they tend to stay there, that is not the case with other heaters we tried, the magnets are smaller and weaker and they only have the one magnet.
Tuning Your UFO Induction Heater.
Another thing we like about the UFO is that you can tune it to work how you want it to work. We have made a quick diagram below to help explain the tuning process, it's very easy and kinda fun to do. There's only one thing to think about with your UFO tuning, that's the "Height" of the pens cap when your pen is in the heater. You can change the height by changing the Heaters Glass Inserts supplied in your kit. You will also find some small silicon discs, they are for fine tuning once you decide on the high or low glass insert. The low one is just a glass tube and the high one is a glass tube with a section inside that acts as the bottom when you insert your pen. We found the heating too rapid with the high one. It put the Cap Tip right in the hottest area. See our illustration which shows you where everything is, it really isn't at all complicated. We assumed the hot coil went from the bottom (where the tip of your cap would be). Once you realize that the coil is actually higher you will understand why you need to adjust it so your cap clicks at the right time.
How to Tune your UFO Induction Heater.
By adding Silicon Spacers you can adjust the time it takes to Click your Cap. Using the straight basic glass tube (low one) and spacers you can fine tune when your Cap Clicks by adding one disc at a time and testing until satisfied. You may prefer your Cap to heat slower to properly penetrate your herb inside the VapCap oven. Experiment, it’s not difficult. As you raise the Cap with Spacers it will start to Click in less time, more rapidly. This is because you are bringing the Tip of the Cap into the Hot Element area. The Cap always takes longer to Click if you don't heat the Tip of the Cap as much using a Torch Lighter. The same applies here, because the Heating Element is not at the bottom and is actually about mid way in the middle of the Cap. You need to raise the Cap to bring the Tip closer to the heat. When the UFO first arrives it usually has the Glass Insert that has a 2nd section inside (high one), we found this put the Cap Tip right inside the Element area and it would Click the Cap in 2 seconds. We wanted slower heating so used the straight tube and 4 spacers, now it clicks in about 5 seconds and it always clicks twice. We remove the VapCap on the 2nd click and it's perfect! You can hold it in longer but the way we have tuned ours is bang on at the 2nd click, we highly recommend you try the method above, it works very well and has made the UFO so much better. All parts included in kit, you may want to revisit this page when you buy one if you forget how to do it. You are welcome to email us for advice if you have any issues setting up your UFO Induction Heater.
Image provided by: leaftrack_1620 (Instagram Handle)
UFO Induction Heater Videos.
Watch the Vapefiend Review the UFO Induction Heater.
Click the image to see his review, it's the best one but is restricted so cannot embed on the page like the other videos. Or click HERE to see the review.
There's nothing quite like being organized!
Image provided by: leaftrack_1620 (Instagram Handle).
Latest version and a well improved one at that, meet the Orion V2 by DynaTec (DynaVap) USA. NZ Stock Due August 2021. Fully Portable Induction Heater for DynaVap VapCap Pens. 50 Clicker! Easy to recharge the device, USB Type-C like the UFO. This one is more expensive, check it out, click the ORION V2 below to visit our Portable ORION V2 Induction Heater (IH) Page.
VapCap Vaping Instructions.
Check out the DynaVap USA Website - VIDEO SECTION
A wide selection of helpful videos to watch.
Check out the DynaVap YouTube Channel - DYNAVAP VIDEOS
A great resource, loads of useful DynaVap Videos.
Helenskinz is an Authorized Reseller of DynaVap products in New Zealand and Australia. Warranty approved. Helenskinz imports all DynaVap products directly from DynaVap USA.
Portable Vaporizer Accessories. Vape Supplies NZ.
We Also Recommend