Menu
Wishlist Cart 0

VapeTube 10 Water Bubbler Tool 10mm for DynaVap NZ

Vaping Fans

  • $3913

Add to Wishlist

Payment Options

Shipping Policy Page - Shipping & Order Info
VapeTube 10 Water Bubbler Tool NZ: $45 NZD Incl. GST.

Ships from NZ
NZ STOCK - Auckland Warehouse.
Click the Notify Me button if out of stock.

Vaping & Infusion Accessories NZ

VapeTube 10 Water Bubbler Tool 10mm for DynaVap.

Portable & perfect for DynaVap VapCap pens, VonG, BB9 Stems etc. Will also fit DaVinci IQ, IQ2, IQC & MIQRO Series vapes on the 10mm male mouthpiece adapter. No need for any special adapters, your DynaVap VapCap will fit into the 10mm Frosted Receptor perfectly with no adapter. If you have other vapes you may be more interested in buying our 14mm VapeTube, the VapeTube 14. You can still use your DynaVap Vape with one of our Nearly Universal Adapters and a different adapter for a Pax, Mighty+ or Crafty+ for example. We have Water Tool Adapters for most of the vapes we sell here.

DynaVap BB9 Glass Stem for DynaVap VapCap & Bubbler NZ

VapeTube Water Bubblers NZ

DynaVap BB9 and Water Bubblers NZ

Hemp Shield Zipper Cases Small & Large NZ

This Bubbler is a classic that started as the AromaTube, this classic design has been around for years. Nice and solid! This is why we say it's portable, it's not a fragile delicate water tool, you can carry it in a bag or jacket pocket easily. As far as Bubblers go this has always been a favorite in our store, they aren't bullet proof but they are certainly more rugged than most Bubblers in the market. They are ideal to hold in your hand, it's only 130mm in length so easy to use discreetly.

VapeTube 10 Bubbler comparison to a 2021 M DynaVap Pen

VapeTube 10 Main Features.

  • 10mm Female Joint works with DaVinci IQ, IQ2, IQC & all DynaVap vapes.
  • 130mm Long - Easy to conceal, discreet vaping, a stock 2021 M pen is 92mm long so the Bubbler is 38mm longer. It's aprox 30mm in diameter.
  • Easy Filling, with 10mm joint facing down place under tap to fill with H2O.
  • The Bubbler will automatically drain to the perfect level before you attach it to your vape.
  • The cool water conditions the vapor allowing bigger and cooler hits with little throat aggravation.
  • Compact H2O Filtration. Small but effective, even though it's a smaller bubbler it still does a great job of cooling your hits.
  • Made with Borosilicate Glass. Crystal clear glass is better in Bubblers so you can see the Vapor as you draw, this helps you see how well your vape is extracting.
  • Easy to Clean - Hot Water, ISO Alcohol, Rock Salt, Randy's Black Label Cleaner. You can even soak it in a Ziplock Bag overnight and give it a good shake before you rinse it with hot water, we have found Randy's to be the best cleaner ever! We don't recommend soap, you don't want to risk getting anything stuck inside the bubbler, stick with ISO & Salt, or Randy's Black Label Glass Cleaner NZ.

VapeTube 10 Watertool 10mm for DynaVap Vape VapCap NZ

A very popular way to use DynaVap with water bubblers is to use a BB Stem. DynaVap make beautiful Glass Stems like the BB9 that we stock in NZ here. It has a water pipe end on the stem so you can plug it into the water piece or bubbler directly without the need for any adapters. These BB9 Stems we sell in NZ are versatile, they can fit a 10mm and a 14mm female joint. So it doesn't matter if you have the 10mm Bubbler or the 14mm Bubbler, all you need is a BB9 Stem to plug your DynaVap Tip into from your pen, or buy a new Tip and Cap and make a dedicated water tool pen.

DynaVap BB9 Glass Stem for DynaVap VapCap & Bubbler NZ

DynaVap BB9 Glass Stem with VapeTube Bubblers NZ

BB9 Glass Stems with Water Bubblers Diagram NZ

DynaVap BB9 Glass Stems for DynaVap VapCap & Water Bubblers NZ

DynaVap BB9 Glass Stems for DynaVap VapCap NZ

Cleaning your VapeTube 10 Bubbler.

You will find warm water and shaking it about inside works well for cleaning, you can start buy soaking it with some our imported Randy's Black Label Glass Bong Cleaner and we also suggest using some ISO Alcohol for the resin build up if any. We also have ISO Alcohol VIPES which are ISO Soaked Wipes, a nice pack made especially for cleaning vapes and vaping equipment. Check out Sneaky Pete's Bubbler Video below, his Bandit is the same as our VapeTubes.

Water Conditioning Tools | Glass Showcase & How-To | Sneaky Pete's Vaporizer Reviews from Sneaky Pete on Vimeo.


What's In the Box:

  • 1 x VapeTube Glass Water Bubbler Tool 10mm.

VapeTube 10 Watertool NZ

*No adapters included.

YouTube Video of Bubblers

Bubbler Water Tools for Vaping - Videos.

Cleaning your Water Bubbler, best methods by Sneaky Pete.

How To Clean Your Glass | Cleaning Glass Water Pieces And Adapters | Sneaky Pete's Vaporizer Reviews from Sneaky Pete on Vimeo.

How to Clean a Glass Bubbler Bong & Hand Pipes With Salt & Alcohol from Purr Glass on Vimeo.

Be Careful Mixing H2O with your expensive Vaporizer!!

Your vaporizer is not covered by warranty if you get water in it, please use all water tools carefully and at your own risk. They can be a lot of fun but be careful if mixing H2O with Electronics. Obviously the DynaVap Pens are ok but keep it in mind if using an Induction Heater, you don't want to get water any where near it.

Delta 3D Mods NZ

Delta 3D Water Tool Adapters: Pax, Mighty, Crafty+, DynaVap etc.
Waterpipe Adapters Delta 3D NZ Pax, Mighty, Crafty+

Other Products we stock.

VapeTube 14 Water Bubbler Tool 14mm for Mighty, Pax, IQ2 NZ Dynavap BB9 Beaded Glass Stems for 10 & 14mm Water Tools


 VapeTube 10 & VapeTube 14 with DynaVap.

The VonG is actually 10mm and 14mm so you can use either the 10mm or the 14mm Bubbler, this shows the DynaVap VonG being used on the VapeTube 14, exactly what it will look like with a Standard M VapCap Pen or the VonG in the VapeTube 10 Water Bubbler. If keen on the Glass on Glass approach for maximum tastiness we highly recommend buying a BB9 Stem to use with your Bubbler. You don't need to build a whole new pen you can just use the tip & cap off your existing DynaVap VapCap of any type, Omni, Vong or standard M of any year! Just push it into the BB9, plug the BB9 into your Bubbler and start drawing vapor bubbles! We have to say after 15 years of vaping this set up has provided some of the best vaping we have experienced as far as flavor, enjoyment, vapor quantity, ease of use and more. It's super pleasant to bubble away for anything up to 30-40 seconds before your Cap clicks. If you throw an Induction Heater into the mix you will have an epic set up. We are enjoying the best vaping with the VapeTube Water Bubbler, a BB9 Stem and Titanium Tip with a Low Temp Cap and then heated with the Orion V2 Induction Heater, all products stocked in Auckland, NZ. We have brand new DynaVap Hemp Shield Vape Cases in stock that are ideal for safely storing your VapeTube Water Tool and accessories.

Small Hemp Shield Zipper Case with Water Bubbler NZ

Large Hemp Shield Zipper Case with Bubbler and Pens NZ

DynaVap VonG in the VapeTube 14 Bubbler Tool NZ

DynaVap VonG in the VapeTube 14 Bubbler Water Tool NZ

Vaping the DynaVap VonG in the VapeTube 14 Bubbler Tool NZ with UFO

Authorized Reseller of DynaVap products NZ

Portable Induction Heaters.

You might be interested in one of our Induction Heaters for DynaVap?
Induction Heaters at Helenskinz for heating & vaping DynaVap Vapes NZ


Fire Glass 90 PRO Glass Stems.

Fire Glass Stems - 90 PRO NZ
Great for Vaping as a Pen.
Especially with Custom Air Port.

 

 Portable Vaporizer Accessories. Vape Supplies NZ.

Imported American Herb Grinders
Need a Grinder?

Vaporizer Cases

RYOT Vaporizer Cases - SmellSafe
Non-Stick SLX Herb Grinders

SLX Herb Grinders NZ

 


We Also Recommend

x
x